Labelmate Label Slitters

Labelmate S-100 / S-200 Label Slitter
Labelmate S-100 Label Slitter Labelmate Part Numbers:
S-100
S-200
Candrel Technologies sells all configurations of the Labelmate S-100 / S-200 Label Slitter.
GET A COMPETITIVE QUOTE
Description:
Label Slitters are a quick and easy way to slit down multiple-across label rolls. These “Stand Alone’ Slitting units are designed to be set in place on the output of your label material so the label material can pass through and be slit into individual rolls. Slitters have high-precision, break-away blades for clean, even slitting of material.
The S-100 handles Label Width of 6″. The S-200 handles Label Width of 10″.
Download Technical Information
Labelmate SLIT-100 / SLIT-200 Deluxe Label Slitting Packages
Labelmate SLIT-100 / SLIT-200 Label Slitter Package Labelmate Part Numbers:
SLIT-100-DELUXE
SLIT-200-DELUXE
Candrel Technologies sells all configurations of the Labelmate SLIT-100 / SLIT-200 Deluxe Label Slitting Packages.
GET A COMPETITIVE QUOTE
Description:
Label Slitters are a quick and easy way to slit multiple-across label rolls into single rolls. For In-Line Slitting the Stand Alone units can be placed at the output of your printer allowing you to slit the labels as they are printed. A  CAT-3-Chuck Rewinder will be needed to wind up the labels after they have been slit.  Off-Line Slitting can be done with the Slitting Packages. These units allow you to slit large pre-printed multiple across rolls labels into several single label rolls.
SLIT-100 Deluxe:

  • 6” wide complete Heavy-Duty “OFF-LINE” Slitting Package
  • S-100 Label Slitter with 2 Slitting Blades
  • CAT-3-CHUCK-HTO Shaft Rewinder
  • CAT-3-STANDARD Shaft Unwinder
  • Locking Bar, Locks the 3 units together
  • HSB-10, 10-Pack Replacement Blades
  • 2 Aluminum Separator Plates. 8” OD
  • 2 Plastic Separator Plates. 8” OD
SLIT-200 Deluxe:

  • 10” wide complete Heavy-Duty “OFF-LINE” Slitting Package
  • S-200 Label Slitter with 3 Slitting Blades
  • CAT-3-CHUCK-10-HTO Shaft Rewinder
  • CAT-3-W10 Shaft Unwinder
  • Locking Bar, Locks the 3 units together
  • HSB-10, 10-Pack Replacement Blades
  • 2 Aluminum Separator Plates. 8” OD
  • 3 Plastic Separator Plates. 8” OD
Download Technical Information
Labelmate TWIN-SLIT-100 / TWIN-SLIT-200 Label Slitting Packages
Labelmate TWIN SLIT Label Slitting Packages Labelmate Part Numbers:
TWIN-SLIT-100-DELUXE
TWIN-SLIT-200-DELUXE
Candrel Technologies sells all configurations of the Labelmate TWIN-SLIT-100 / TWIN-SLIT-200 Label Slitting Packages.
GET A COMPETITIVE QUOTE
Description:
Label Slitters are a quick and easy way to slit multiple-across label rolls into single rolls. For In-Line Slitting the Stand Alone units can be placed at the output of your printer allowing you to slit the labels as they are printed. A  CAT-3-Chuck Rewinder will be needed to wind up the labels after they have been slit. Off-Line Slitting can be done with the Slitting Packages. These units allow you to slit large pre-printed multiple across rolls labels into several single label rolls.
TWIN-SLIT-100-DELUXE:

  • 6” wide complete Heavy-Duty Dual Spindle “OFF-LINE” Slitting Package
  • TWIN-CAT-3-CHUCK Dual Spindle Rewinder
  • Two TC-C76-170 3” diameter “Quick-Chucks”
  • S-100 6” wide Label Slitter with 2 blades
  • CAT-3 Standard Rewinder with 3” Fin-Style Core Holder Used as a variable tension-control Unwinder to provide the maximum control over rewind tension
  • Adjustable Locking Bar
  • HSB-10 Replacement Blades (10 Blades)
TWIN-SLIT-200-DELUXE:

  • 8.6” wide complete Dual Spindle “OFF LINE” Slitting Package
  • TWIN-CAT-3-CHUCK dual spindle Rewinder
  • Two TC-C76-220 3” diameter “Quick-Chucks”
  • S-200 Label Slitter with 3 blades
  • CAT-3-W10 Standard Unwinder/Rewinder with 3” Fin-Style Core Holder
  • Adjustable Locking Bar
  • HSB-10 Replacement Blades (10 Blades)
Download Technical Information